Z-250 3D Printer
Industrial grade FDM 3D printer, equipped with constant temperature chamber, supports materials as ABS, ASA, PC, PLA, PETG, etc. Z-250 supports dual-nozzle printing, users can print with two different colors of materials or water-soluble supporting materials.
* Features |
- The Z-250 industrial 3D printer was born in 2005 and has been upgraded three times so far, including modular improvement of nozzle and feeding mechanism. |
- With the improved modular nozzle, the operator can easily remove/install the nozzle with one button, greatly reducing the after-sales cost and the waiting time. |
- The feeding mechanism is changed from the original machining mode to the batch production mode of dies. The double gear feeding structure greatly improves the feeding stability and ensures material output. |
- Industrial grade accuracy, minimalist industrial design. |
- Fully enclosed casing,chamber is equipped with insulation cotton, equipped with intelligent constant temperature control system, not only the plateform heating. |
- Uninterrupted printing for over 72 hours, quiet, stable and durable. |
- Lighting system: LED secondary protection human eye design, print synchronous lighting, anti-glare. |
- Cross structure to achieve industrial grade accuracy, nozzle module by mold manufacturing, high stability. |
- Replace the nozzle without a screwdriver, directly plug it, no pressure on the novice. |
- The nozzle is made of brass and mould, which realizes long-lasting printing. |
- Print mode: |
Mode 1: Printing with two different colors of Materials. |
Mode 2: Printing with water-soluble support materials, removing the supporting materials easier. |
|
* Specification
Model | Z-250 | |
Print Volume | 250*220*300 mm | |
Accuracy | ±0.1 mm | |
Print Head | Single/ Dual print head supported | |
Print Speed | ≤200 mm/s | |
Operating Interfaz | 2.8 inches color touch screen | |
Weight | 22 kg | |
Nozzle Diameter | 0.2 mm,0.3 mm,0.4 mm | |
Operating Software | Cura, Slic3r, Simplify3D | |
Power Input | 100-240 V | |
Power Output | 24 V, 5 A | |
Date Transfer | SD card,USB | |
Data Format | STL, OBJ, Gcode | |
Supported Materials | PLA, ABS, TPU, etc. | |
|
|
|